ZWO AM3 in WiFi Station Mode

AM3 in WiFi Station Mode

updated: 2024-10-29

Connect the hand controller with the AM3 to enable WiFi connectivity
On your computer, mobile phone or tablet (called "device" in this document) open your WiFi settings and search for a WiFi Network like "AMH_10xxx" (if you haven't changed the WiFi settings of your mount yet)
Enter the WiFi default key "12345678" (if not yet modified)
Open the WiFi settings on your device and check the IP address of the gateway (like 192.168.4.1)
On your device open an internet browser and enter the gateway IP address from the last step into the browser
The main mount management window should now appear on your internet browser
Next activate the WiFi (WLAN) on the mount:
Select your home network from the list of networks and enter the network key
Your mount is now connected to the internet
Note AM3's new home IP address (e.g. xxx.yyy.zzz.61) for future use.

Important: SkySafari integration with the AM3 connected directly to your home network has not yet been successfully tested.